** Under "'''Configuration''' - '''Settings'''", switch ON '''Share GPS via Bluetooth'''.
+
** Under "'''Configuration'''" - "'''Sensors'''", make sure that iOS Location Services is ON and all other sensors are OFF.
+
* With the slave device:
+
** Under "'''Configuration''' - '''Settings'''" make sure '''Share GPS via Bluetooth''' is OFF.
+
** Under "'''Tools'''" - "'''Sensors'''" make sure that iOS Location Services is OFF and all other sensors are OFF.
+
** Under "'''Configuration'''" - "'''Sensors'''", switch ON the Internal Sensors Bridge. The red light should change to orange and then to green. If not, toggle the switch.
+
<br />
[[File:pair2.jpg]]
[[File:pair2.jpg]]
+
<br/>
+
----
+
<u>'''Notes:'''</u>
+
* In order to maintain the connection Air Navigation Pro must be running on both devices at the same time during the whole flight.
+
* Everything explained above also works using Wi-Fi instead of Bluetooth.
+
* In some cases, cellular data (SIM card) should be ON for the paring to work.
+
<br />
+
----
+
<br />
+
Back to <u>[[Air Navigation iOS|index]]</u>
+
<br />
Latest revision as of 15:21, 27 October 2015
After doing this:
With the master device:
Under "Configuration - Settings", switch ON Share GPS via Bluetooth.
Under "Configuration" - "Sensors", make sure that iOS Location Services is ON and all other sensors are OFF.
With the slave device:
Under "Configuration - Settings" make sure Share GPS via Bluetooth is OFF.
Under "Tools" - "Sensors" make sure that iOS Location Services is OFF and all other sensors are OFF.
Under "Configuration" - "Sensors", switch ON the Internal Sensors Bridge. The red light should change to orange and then to green. If not, toggle the switch.
Notes:
In order to maintain the connection Air Navigation Pro must be running on both devices at the same time during the whole flight.
Everything explained above also works using Wi-Fi instead of Bluetooth.
In some cases, cellular data (SIM card) should be ON for the paring to work.
