Difference between revisions of "Search Module/es"

Revision as of 20:59, 7 October 2016

Other languages:

Deutsch • ‎English • ‎español

Presionando en este botón ubicado en la barra superior de herramientas en un iPad o dentro de la barra de herramientas en un iPhone/iPod (accesible desde el botón del «destornillador»), puede acceder a la base de datos de waypoints.

Búsqueda rápida

La Búsqueda Rápida no solo le permitirá llegar rápido al waypoint deseado, sino también crear nuevos usando ciertos comandos. Los resultados pueden ser seleccionados como destinos hacia los cuales dirigirse (opción "dirigirse hacia"), agregados a la ruta actual, exhibidos en el mapa o agregados como waypoints del usuario (si todavía no es un waypoint de la base de datos).

Buscar por identificador

Ingresando al menos tres caracteres en el campo de búsqueda, se iniciará la misma. Tendrá en cuenta:

Identificadores (códigos OACI o radio-ayudas) en la base de datos de waypoints (incluyendo waypoints del usuario)
Nombre de ciudades o montañas
Documentos almacenados en el "document browser"

Los resultados serán exhibidos por categorías (waypoints, radiofaros, aeropuertos).

Buscar por coordenadas

También puede ingresar coordenadas en los siguientes formatos, mallas de referencia o sistemas geodésicos:

WGS84 in DD:MM:SS
WGS84 in DD:MM.decimal
WGS84 in DD.decimal
Standard UTM
UTM with bands
UPS
MGRS 100m
MGRS 10m
MGRS 1m

Irish grid without zone
Irish grid with zone
NZ Grid 1949
NZ Grid 2000
Swissgrid (CH1903)
UK Grid without zone
UK Grid with zone
Swedish grid RT90
Swedish grid SWERED99TM

l motor de búsqueda procurará interpretar lo ingresado para que coincida con el dato correcto. Para evitar cualquier tipo de ambigüedad entre las cuadrículas es necesario ingresar el código de dos letras del país escogido.

Irish grids : IE
New Zealand grids : NZ
Swiss grid : CH
UK grids : UK
Swedish grids : SE

Ejemplos

WGS84 in DD.decimal	46.8943 -5.4535
WGS84 in DD:MM:SS	23:34:56N 145:12:01W
Swissgrid	CH 553986 200005
Swedish grid	SE 6669189 486557
MGRS	32TKR6770698424

Si una coordenada válida ha sido ingresada, el resultado aparecerá primero en la lista de resultados. El curso verdadero y distancia desde la posición actual del GPS será exhibido también.

Searching relative waypoints

By using similar syntax as when looking for coordinates and adding commands, it is possible to create waypoints relative to a known location. 3 Modes are available:

Location, Direction, Distance
Location, Direction, Speed, Time
Location, Direction, Location, Direction

Location: can be either a coordinate or a waypoint identifier.

Direction: can be true bearing or radial.

True bearing will be an angle from 0 to 360 and prefixed with a B, e.g. B055.
Radial will be treated as a magnetic bearing and will be an angle from 0 to 360, prefixed with an R, e.g. R220. It will be converted to true by using the current magnetic variation model.

Distance: a value in nautical miles prefixed with a D. An optional suffix will allow using other units. Example: D120KM. Supported units:

SM (Statute miles)
KM (Kilometers)
M (meters)

Speed: a value in knots prefixed with an S or GS. An optional suffix will allow using other units. Example: S100KMH. Supported units:

MPH (statue miles per hour)
KMH (kilometer per hour)
MPS (meters per second)

Time: can be a relative in minutes or an absolute time in HH:MM UTC, prefixed with a T or AT for absolute. Example: AT08:21.

Examples

Location, Direction, Distance

For these examples we will use the WGS84 in DD:MM:SS format.

Creating a waypoint knowing a radial and DME to a navigation aid.
For this, we need to enter a string with the following information: Location of the navigation aid (ICAO Code or Coordinates), radial and distance to the aid (in Nautical miles, Statute miles, Kilometers or meters).

Let's say I want to create a point that is on radial 275 of the VOR of Geneva (GVA) at 25NM DME. I will have to enter the following string in the tool: GVA, R275, D25

The tool will choose the navigation aid with that name that is nearest to your actual position. Alternatively you can enter the coordinates:

46:15:12 N 06:08:14 E, R275, D25

If you want to use the true bearing instead of the radial, you have to change the R for a B. Also, to change the unit just add SM for statute mile, KM for Kilometer or M for meter at the end of the distance:

GVA, B275, D25KM

Location, Direction, Speed, Time

Let's say you are flying and you are requested by ATC to report your position 5 minutes after passing over GVA. You are flying at 108 knots GS and you are on the radial 275 of GVA.

You can enter this String and the tool will search for that point: GVA, R275, S108, T5

You can also enter a specific time in UTC. Use the Code AT before the time for this: GVA, R275, S108, AT12:58

You can also enter the speed in statute miles per hour, kilometers per hour and meters per second. Enter just MPH, KMH or MPS after the speed.

Location, Direction, Location, Direction

Creating a waypoint knowing the radials of two navigation aids.
You can create a point easily by entering the following information: Navigation Aid 1, Radial 1, Navigation Aid 2, Radial 2.

GVA, R100 , SCS, R300

Of course, you can use coordinates or bearings for the above command.

Search by geocoded places

It is also possible to search by place names. By acquiring our Add-on Streets and places search you will be able to search for places like hotels, bars, hospitals and much more points of interest in the database. You can then use these points as regular waypoints by adding them to routes or showing them on the map.

Browse database...

300px

If you are not able to find the waypoint you are looking for, you can tap on "browse database...". You can visualize nearby waypoints or use the «search» tab to search by country or search directly the waypoint you are looking for. It is possible to search by “name”, “ID” or “place”.

Once you found the desired waypoint, you can press on it to select it as a “direct to” or adjust it to one of the instruments (HSI, VOR, ADF); you can also press on the yellow disclosure button on the right side and check the information about it such as name, city, frequency (for Navaids), runway and contact frequency info (for Airfields) and you can center the waypoint on the moving map by selecting the «Show on map» button.

If you are on Edit Mode, the selected waypoint will be automatically added at the end of the route you are creating.

Back to previous page.

@@ Line 72: / Line 72: @@
 |}
-If a valid coordinate has been entered the result will appear as the first line of the search result. A true bearing and distance from the current GPS location will be displayed as well.
+Si una coordenada válida ha sido ingresada, el resultado aparecerá primero en la lista de resultados. El curso verdadero y distancia desde la posición actual del GPS será exhibido también.
 ===Searching relative waypoints===