Ruta

Jump to: navigation, search
Other languages:
Deutsch • ‎English • ‎español



The Route Instrument shows the waypoints of the created route. Depending which mode of the app is activated the information shown is different. You can toggle between modes by tapping on the padlock icon on the left upper corner.



Edit Mode

Route edit.PNG


  • Al estar en modo editar, una barra se desplegará en la parte superior y se podrá buscar waypoints y agregarlos a la ruta. Se pueden agregar numerosos puntos separandolos por un espacio.
  • Se podrá observar:
    • Cantidad de piernas, distancia total y ETE dependiendo de la velocidad crucero de la aeronave y el viento.
    • Curso magnético o verdadero (dependiendo de los Ajustes) entre las piernas y el rumbo si el viento ha sido actualizado desde el panel Totales.
    • Distancia entre piernas
    • ETE entre puntos dependiendo de la velocidad crucero de la aeronave y el viento.
  • Presionando en el ícono rojo que se encuentra al lado del waypoint le permitirá eliminarlo
  • Al presionar el nombre del waypoint, el mapa se centrará en él
  • Se puede ver información sobre el waypoint y realizar distintas acciones presionando en la "I" amarilla.
  • Al presionar en las tres líneas ubicadas al costado de los puntos, se podrán reordenar arrastrándolos hacia arriba o hacia abajo
  • En un iPad, al presionar el triángulo amarillo ubicado en la esquina inferior derecha, se esconderá el segundo instrumento y solo se mostrará el instrumento de ruta en el costado izquierdo.


Navegación Vertical

Al presionar en el número amarillo al lado del PLN se podrá configurar una altitud planificada para antes y después de llegar al waypoint. Si hay un cambio en la altitud sobre el waypoint, dos números aparecerán separados por una barra (/).


Modo de vuelo

Route flight.PNG


  • Al no estar en Modo Editar, se podrán ver las siguientes cosas:
    • Waypoints que ya han sido sobrevolados en color azul
    • El próximo waypoint en magenta
    • Distancia desde la posición actual a los waypoints próximos
    • Rumbo al próximo waypoint desde la posición actual
    • Altitud planificada de sobrevuelo. Si ocurre un cambio en la altitud planificada en este punto, se mostrará dividido en antes y después con una barra (/).
    • ETA, ETE al siguiente waypoint y ETE entre los próximos waypoints tomando en cuenta la velocidad de pista actual.
  • Al presionar sobre un waypoint, se lo podrá seleccionar como el próximo y usarlo para los instrumentos.
  • Se puede ver información sobre el waypoint y realizar distintas acciones presionando en la "I" amarilla.



Summary

The Summary section will display the name of the route, departure and arrival airport, the number of legs, distance and ETA. When tapping on the Route a new menu will open with further options.



General

Date of Flight
caption
Set the date and time of departure for this route.
Pilot in command
Set the pilot flying this route.
Aircraft
Select the aircraft for the route. You can create a new aircraft profile by tapping on "+ New aircarft...".
Summary aircraft.jpg


Settings
This settings will apply mainly to the Operational Flightplan
Round flight time up
Always round times to the next minute
Account for climb/descent in time estimate
Adds time penalties during climbs and bonuses during descents
Show ETA and date
Prints date of flight and ETA on the operational flightplan
Corridor width
Set a corridor width for computing the MSA (Minimum Safe Altitude). The corridor will also be visible as a red area on the Elevation Graph.
Corridor width.jpg


If you set a corridor width of 3NM, Air Navigation Pro will look for the MSA on the area belonging to a corridor of 3NM along the route. Keep in mind, that Air Navigation Pro uses the MSA to calculate the TAS. A higher MSA will mean a higher TAS.

Route

caption
Name
By tapping on this field you will be able to change the name of the route.
Routing
Departure, Destination and number of legs.
Distance
Distance of the Route.
Cruise speed
Information taken from the aircraft profile.
Holding time
Define a holding time. The time you select will be stored for your destination. The next time you fly to this airport Air Navigation will remember how much you set as "holding time".
ETE
ETE calculated with information from the aircraft profile.
Alternate
Select an alternate airport for the route.
Dist. to altern.
Distance to alternate from last WP from route.
Endurance
Calculates endurance once the fuel on board is entered.

Fuel

caption
Fuel on Board
Enter the fuel on board of the aircraft.
Fuel flow
Information gathered from the aircraft profile.
Taxi time
Sets taxi time.
Taxi
Calculates taxi fuel.
Cruise
Calculates cruise fuel for route.
Alternate
Calculates fuel needed for leg DEST - ALTN.
Reserve time
Allows you to set a reserve time (By default 45 mins).
Reserve
Calculates fuel for reserve.
Fuel Required
Calculates fuel for the trip taking in account taxi, cruise, alternate and reserve time.
Contingency
Endurance (Fuel on Board) minus Fuel required.



Wind

caption

You can calculate the effect of current wind to your route. For the time being the wind calculates will be only the wind at ground level.

No wind
Don't take in account wind for the route.
Wind per leg
Downloads from the internet the current winds for your route legs. To push the service tap on the circled arrow at the bottom of this menu. This will take some seconds and the message "Last update: Never" will change to the current time.
Wind per route
Enter manually a direction and speed of the wind for the whole route.



caption
Remember that you must download the Free Elevation data in order to calculate the Wind per leg info.




Operational Flightplan

The route created can be converted to a flight log that can be printed out or sent by E-Mail.


Legs

Will display information about the legs of the Route. While flying, it will display the actual distance and bearing to next waypoint.


Pressing the "i" at the right of every WP will show information of the WP and the option to select it or center it on the map.




Sharing

By tapping on the yellow square with the arrow pointing up you will be able to share the created route. You can share the route via:

  • AirDrop
  • iOS Native apps ilke Message, Mail or Notes
  • Third party apps like Dropbox.



Back to previous page.