Difference between revisions of "Installation"

Revision as of 14:29, 13 July 2015

Getting started with Air Nav Pro

After installation of the application, at first launch, the system will ask for authorization to access location data (GPS). You should allow GPS access to Air Navigation otherwise realtime navigation functionalities will not work properly. If your device do not have an integrated GPS device, you should get some of the ones advised on page 5.

After launching Air Navigation for the first time, the map should be centered to your current location. The application has an internal waypoints database and you should see waypoints in the vicinity on the map.   Please note that NO map in the background is installed with the application. You can install a map from various free-of-charge or commercial sources in the «Map Store» module within the app or from the «Addons» page of the User Account Website. You can find more information on how to install maps/charts in the next page.

Should you wish to change length, speed or altitude units, you can do so from the «Settings» panel.

Installing maps and charts

Screenshots of our products: link to the gallery of screenshots

Different type of products can be installed to be used as the background image of the moving map module or to use with the 3D module and the Elevation Graph: 

Free-of-charge maps;
Charts from the public domain;
Paid charts;
Geo-referenced approach charts;
3D data;
Free Elevation data.

These products are stored in the iPhone/iPad’s memory and do not require an internet connection while flying. 

There are two ways of getting the charts/data: 

Map Store module.
Xample Services website.

In this chapter, we will focus on the Map Store . There is a dedicated part in the Xample Services chapter with information on how to use the Xample Services account to purchase products.

Before you attempt to download a product you should check that: 

Your iPhone/iPod/iPad is connected to a functional Wifi network;
Bluetooth is turned OFF on your device, as it can disturb the Wifi network, sometimes leading to download failure.

if you wish to uninstall any chart, map or 3D data, you should do it from the panel «Installed products» of the Map Store module.

Map Store

The Map Store module has been modified totally on version 5.3 to make it more easy to use. It looks like the screenshot beside shows and it’s reachable from the Configuration button/tab. It has 4 sections:

File:MapStore 1.png

Installed products: It shows the charts, maps and data that is currently installed in the app. 
All my products':   It shows all the purchased charts, maps and data and the free products downloaded by the user, too. If you reinstall the application or lose a map, here you will get it back. It also allows to sync the products purchased on the Android version. 
Catalog File:MapStore 2.png 200px: It is divided into two parts:

by country: you can choose the country you are interested in and you will show all the charts/maps and data available for that country. 
by product groups: you will show the products by their category.

Downloads: It lists current and pending downloads. This module is typically used to monitor download progression of a product. It is possible to reorder/delete the downloads or cancel all by pressing on the Edit button located at the upper left corner.

Re-installing purchased maps, charts and 3D data

File:MapStore 3.png

200px

The button labeled «All my products» reachable from the bottom bar of the module will display all the maps, charts and 3D data acquired by the user iTunes account from the very first time, no matter they were installed or not.  In order to re-install previously acquired maps, charts or 3D data, you can look into this module and press on the

File:MapStore 6.png

150px

desired one to install it. You can also choose to install them all by pressing on the upper left corner button (see screenshot on the right).

You should Always use the same iTunes account.

The option Input code is still present for a product that was sold with a license code, such as the German VFR approach charts.

Updates

File:MapStore 4.png

200px

Every time there is an update for a map, chart or 3D data, you will be notified by a red symbol as the screenshot shows beside.

 The red symbol will appear on both the bottom bar of the Map Store module and next to the product.  The reason for an update may be: 

A chart update that is part of your subscription is available; 
We found an issue with the chart/data and we released a fixed version.

Waypoints and Airspaces

In order to get more frequent updates from the waypoints and airspaces databases, you should proceed as follows:

Go to Xample Services
Create a User Account
Go to the Addons page
SUBSCRIBE to:
- Free waypoints database
-  Free airspaces database

Then, on your iPad/iPhone:

File:MapStore 5.png