Difference between revisions of "HSI/fr"

Jump to: navigation, search
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 4: Line 4:
 
[[File:hsi_instr.jpg|250px|caption|left]]
 
[[File:hsi_instr.jpg|250px|caption|left]]
  
La partie en haut de l’écran contient un indicateur HSI. L’aiguille jaune est le pointeur de sélection de radiale, la partie en mouvement au milieu est l’indicateur de déviation (deviation indicator) (CDI) qui affiche la déviation (+ / - 12 degrés) par rapport à la radiale sélectionnée. Contrairement à un vrai HSI où le bouton orange (Heading bug) est utilisé pour commander l’auto-pilote, Le «heading bug» affiche le cap vers le point de navigation sélectionné. Le HSI n’utilise pas le compas magnétique mais le cap de l’appareil.
+
Air Navigation can simulate an HSI (Horizontal situation indicator).
  
 
The yellow needle is the course select pointer (OBS), the moving part in the middle is the course deviation indicator (CDI) which displays the deviation (+/- 12 degrees) from the selected radial or course to or from the selected waypoint.  
 
The yellow needle is the course select pointer (OBS), the moving part in the middle is the course deviation indicator (CDI) which displays the deviation (+/- 12 degrees) from the selected radial or course to or from the selected waypoint.  
Line 10: Line 10:
 
Unlike a real HSI where the orange heading bug is used to set a course for the autopilot, the heading bug displays the bearing to the selected waypoint. Also the HSI does not display heading but the track of the aircraft.
 
Unlike a real HSI where the orange heading bug is used to set a course for the autopilot, the heading bug displays the bearing to the selected waypoint. Also the HSI does not display heading but the track of the aircraft.
  
L’avantage du HSI est qu’il affiche la position de l’appareil au milieu en relation avec la radiale sélectionnée. L’indicateur de cap va effectuer une rotation afin de correspondre au cap actuel. La sélection de la radiale s’effectue par un touché-glissé déplacé avec le doigt sur la partie gauche ou droite de l’indicateur et en glissant en haut ou en bas.
+
The compass card will rotate automatically to match the current flying track.
 +
Radial or course selection is done by touch and swipe gesture up or down on the left or right of the compass ring.
  
[[File:danger.jpg]]Un '''drapeau d’alerte “NAV”''' (comme indiqué dans l'image ci-dessus) vous indiquera qu’il ne faut pas faire confiance à l’indicateur HSI dans ces situations:
+
[[File:warning_sign.png]] A “NAV” warning flag will let you know that you should '''NOT''' trust the HSI indicator in the following cases:
* '''si aucun point de navigation''' n'est sélectionné;
+
* No waypoint is selected for the instrument;
* la distance est de '''plus de 250 miles nautique;'''
+
* The waypoint distance is over 250 nautical miles;
* En cas de '''mauvaise réception GPS''';
+
* The GPS accuracy is bad;
* Vitesse '''moins que 5 Kts.'''
+
* Ground speed is less than 5 Kts.
<br />
+
<br/>
 
----
 
----
<u>'''Note:'''</u> Il est à noter que vous pouvez toujours obtenir des informations de déviation quand la précision du GPS est de moins de 2.5 miles nautiques. Dans ce cas, le compas sera orienté vers le nord.
+
<u>'''Note:'''</u> Please note that you may still get correct deviation information when GPS accuracy is less than 2.5 nautical miles. In this case the compass card will be oriented to the north.
 
----
 
----
  
 
En dessous de l’indicateur principal, le point de navigation sélectionné est affiché ainsi que la distance par rapport à celui-ci (grand cercle) et le symbole de précision du GPS. Vous pouvez utiliser  '''n’importe quel point de navigation''' (Airports, VOR, NDB, etc) avec l’instrument HSI. (Un vrai indicateur HSI requiert un signal radio provenant d’un émetteurs VOR, VOR/DME ou VORTAC).
 
En dessous de l’indicateur principal, le point de navigation sélectionné est affiché ainsi que la distance par rapport à celui-ci (grand cercle) et le symbole de précision du GPS. Vous pouvez utiliser  '''n’importe quel point de navigation''' (Airports, VOR, NDB, etc) avec l’instrument HSI. (Un vrai indicateur HSI requiert un signal radio provenant d’un émetteurs VOR, VOR/DME ou VORTAC).
  
Vous pouvez sélectionner un nouveau point de navigation depuis la base de données avec le bouton bleu en bas à droite de l’instrument. Veuillez vous référer à l'article <u>[[Select a waypoint from the database/fr|«Sélection de points dans la base de données»]]</u> pour plus d’informations. (version iOS)
+
You can select a new waypoint from the database with the blue disclosure button at the bottom part of the instrument (see screenshot).
 +
Please read <u>[[Search Module]]</u> to get information about waypoint search and selection. (iOS version)
  
[[File:hsi3.jpg]]
+
[[File:hsi_info.jpg]]
  
 
----
 
----
<u>'''Note:'''</u> remember that you will ONLY find the spinball at the bottom of the instrument on iPhone/iPod Touch devices.
+
<u>'''Note:'''</u> remember that you will ONLY find the slipball at the bottom of the instrument on iPhone/iPod Touch devices.
 
----
 
----
 
----
 
----
 
Back to <u>[[Air Navigation Android|index]]</u> (Android)
 
Back to <u>[[Air Navigation Android|index]]</u> (Android)
  
Retourner à <u>[[Air Navigation iOS/fr|l'index]]</u> (iOS)
+
Back to <u>[[Instruments|previous page.]]</u> (iOS)
 
<br />
 
<br />
 +
[[Category:Instruments]]

Revision as of 17:38, 3 November 2016

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎português



caption

Air Navigation can simulate an HSI (Horizontal situation indicator).

The yellow needle is the course select pointer (OBS), the moving part in the middle is the course deviation indicator (CDI) which displays the deviation (+/- 12 degrees) from the selected radial or course to or from the selected waypoint.

Unlike a real HSI where the orange heading bug is used to set a course for the autopilot, the heading bug displays the bearing to the selected waypoint. Also the HSI does not display heading but the track of the aircraft.

The compass card will rotate automatically to match the current flying track. Radial or course selection is done by touch and swipe gesture up or down on the left or right of the compass ring.

Warning sign.png A “NAV” warning flag will let you know that you should NOT trust the HSI indicator in the following cases:

  • No waypoint is selected for the instrument;
  • The waypoint distance is over 250 nautical miles;
  • The GPS accuracy is bad;
  • Ground speed is less than 5 Kts.



Note: Please note that you may still get correct deviation information when GPS accuracy is less than 2.5 nautical miles. In this case the compass card will be oriented to the north.


En dessous de l’indicateur principal, le point de navigation sélectionné est affiché ainsi que la distance par rapport à celui-ci (grand cercle) et le symbole de précision du GPS. Vous pouvez utiliser n’importe quel point de navigation (Airports, VOR, NDB, etc) avec l’instrument HSI. (Un vrai indicateur HSI requiert un signal radio provenant d’un émetteurs VOR, VOR/DME ou VORTAC).

You can select a new waypoint from the database with the blue disclosure button at the bottom part of the instrument (see screenshot). Please read Search Module to get information about waypoint search and selection. (iOS version)

Hsi info.jpg


Note: remember that you will ONLY find the slipball at the bottom of the instrument on iPhone/iPod Touch devices.



Back to index (Android)

Back to previous page. (iOS)