(Marked this version for translation) |
|||
| Line 5: | Line 5: | ||
---- | ---- | ||
| + | <!--T:2--> | ||
To create an airspace follow the next steps: | To create an airspace follow the next steps: | ||
| + | <!--T:3--> | ||
1. Choose the group you want to share the data. | 1. Choose the group you want to share the data. | ||
| + | <!--T:4--> | ||
2. Click on the tab '''Airspaces''' and select the option '''Create airspace'''. | 2. Click on the tab '''Airspaces''' and select the option '''Create airspace'''. | ||
| + | <!--T:5--> | ||
2. Fill at least the mandatory fields and press on the '''Create''' button under the title '''Airspace Geometry'''. Then, you will be able to start drawing the polygon. | 2. Fill at least the mandatory fields and press on the '''Create''' button under the title '''Airspace Geometry'''. Then, you will be able to start drawing the polygon. | ||
| + | <!--T:6--> | ||
3. After creating the airspace you will be able to Modify or Clear it. | 3. After creating the airspace you will be able to Modify or Clear it. | ||
| + | <!--T:7--> | ||
Alternatively, you can import a .txt file containing airspaces. After importing the file, you will be able to edit or remove each airspace. | Alternatively, you can import a .txt file containing airspaces. After importing the file, you will be able to edit or remove each airspace. | ||
| + | <!--T:8--> | ||
For further information about the file format, please refer to the article [[Airspace file]]. | For further information about the file format, please refer to the article [[Airspace file]]. | ||
| + | <!--T:9--> | ||
---- | ---- | ||
[[File:danger.jpg|caption|left]]'''Important:''' Only Open Air format is supported in case you import a .txt file. | [[File:danger.jpg|caption|left]]'''Important:''' Only Open Air format is supported in case you import a .txt file. | ||
| + | <!--T:10--> | ||
---- | ---- | ||
Back to <u>[[Share your data | previous page.]]</u> | Back to <u>[[Share your data | previous page.]]</u> | ||
<br /> | <br /> | ||
</translate> | </translate> | ||
Revision as of 21:23, 6 June 2016
To create an airspace follow the next steps:
1. Choose the group you want to share the data.
2. Click on the tab Airspaces and select the option Create airspace.
2. Fill at least the mandatory fields and press on the Create button under the title Airspace Geometry. Then, you will be able to start drawing the polygon.
3. After creating the airspace you will be able to Modify or Clear it.
Alternatively, you can import a .txt file containing airspaces. After importing the file, you will be able to edit or remove each airspace.
For further information about the file format, please refer to the article Airspace file.
Important: Only Open Air format is supported in case you import a .txt file.
Back to previous page.