- Location Sources: Used to display your current location and altitude (GPS-based)
- Attitude Sources: Used for the synth view
- Pressure Sources: Used to show your pressure altitude
- Traffic Sources: Used to display nearby aircrafts
Some of the external devices can be used for multiple sources. For example the Levil AHRS G provides location, attitude, pressure and traffic information to Air Navigation Pro.
Location Sources
Internal Sensors bridge
- to pair with another device (an iPad with an iPhone for example). It is possible to connect a Wifi only iPad to an iPhone with an internal GPS module and let the iPhone share the location data with the iPad.
Flight Simulators
- Air Navigation Pro can be connected to flight simulators and use them as source for the data displayed on it:
- MS Flight Simulator X / Prepar3D
- X-Plane
External Devices
- External sensors that transmit location data to Air Navigation Pro
- Flytec SensBox
- Levil AHRS G Mini and iLevil 1 & 2
- FLARM / AirAvionics Air Connect
iOS Location Services
- to be able to receive GPS signal (either internal or external). Note that other External GPS receivers like the ones from Bad-Elf, Garmin or Dual will use this sensor.
Attitude Sources
Internal Sensors bridge
- used to share attitude between devices
Flight Simulators
- Air Navigation Pro can connect to flight simulators and use them as source for the data displayed on it:
- MS Flight Simulator X / Prepar3D
- X-Plane
External Devices
- external sensors that transmit attitude data to Air Navigation Pro:
- Flytec SensBox
- Levil AHRS G Mini and iLevil 1 & 2
Internal IMU
- to connect with the internal gyroscopes of the iPad/iPhone.
Pressure Sources
Internal Sensors bridge
- Used to share pressure information between devices
Flight Simulators
- Air Navigation Pro can connect to flight simulators and use them as source for the data displayed on it:
- MS Flight Simulator X / Prepar3D
- X-Plane
External Devices
- External sensors that transmit pressure data to Air Navigation Pro:
- Flytec SensBox
- Levil AHRS G Mini and iLevil 1 & 2
- ASI FlyNET2
Internal Barometric sensor
- Starting with the iPhone 6 & iPad Air 2, the devices are equipped with a barometer. Air Navigation leverage this barometer to better understand the location of the aircraft and show even more accurate data.
Note: Remember that if you are flying on a pressurised cabin, the sensor will show the cabin altitude and not the flight altitude. In order to correct this, you just have to disable the iPhone/iPad's barometric sensor and enable the GPS one.
Traffic Sources
- Uses the ADS-B information and displays it on the moving map
FLARM / Air Avionics Air Connect
- FLARM receivers are only compatible with Air Navigation Pro when using Air Connect from Air Avionics.
Nota: Se ha demostrado que otros receptores ADS-B cómo PilotAware también son compatibles con Air Navigation. La conexión con Air Nav Pro tiene que ser via WiFi para que estos dispositivos funcionen. No podemos enumerar taxativamente todos los dispositivos que son compatibles. Sólo hemos probado aquellos que fueron recién mencionados, no podemos garantizar que otros también funcionen.
Volver al índice