The Chronometer/Alarm feature is accesible from the Instruments module.
From there you can see the actual time and date.
- Pressing on "UTC" will change the displayed time between local or UTC (Z) time.
Pressing on the tabs "Chronometer" or "Alarm" will change the functionality
Chronometer
When Chronometer is selected Beneath the time you will find two time counters: "Stop Watch" and "ET"
- You can start the Stop Watch by tapping on the "Play" icon on the left of the time.
- When the Stop Watch is running, you have the option to stop it with the "Stop" button on the left.
- With the Stop Watch stopped you can either select to restart the time by pressing the "Play" button on the left or to reset the time by pressing the "Arrow" button on the right.
- Pressing on the "Pause" button on the left when the Stop Watch is running will trigger the "Lap function". The time will continue running but it will display the time of the moment when the "Pause" button was pressed.
- Pressing on the right "arrow" icon will resume the time
- Pressing on the "Stop" icon will stop the timer
Beneath the Stop Watch is the Elapsed Time (ET) indicator. It works like the Stop Watch but it will display Hours and Minutes instead of Minutes and Seconds.
Alarm
Alarms are useful while flying to remember you of important things like checking / switching the fuel tank or calling ATC at a specific time or period.
When alarm is selected you will find beneath the time the label "Next Alarm:" and the button "Add New Alarm". If many alarms are set the next one to go off one will appear next to "Next Alarm:".
To create an alarm just tap on "Add new Alarm":
- Select a title and tap on "Done". There are three default titles:
- Check fuel tank
- Check icing
- Next call
- You can create new titles by tapping on the "+" icon.
- Set a Time and press "Done". You have to modalities:
- Custom : You can choose an exact time for the alarm to go off
- Select one of the default options offered by the app (in 10, 20, 30 Minutes, etc)
- Choose repeat if you want the alarm to repeat after it goes off
To delete an alarm:
- Just swipe from right to left on the alarm. The button "Delete" will appear. Tap on it.
When the Alarm goes off a pop-up message will appear displaying the title and the time. The Alarm module will blink red if it is opened. If you set the option "repeat" You will have two options:
- Cancel Alarm, to dismiss the alarm
- Reschedule, to automatically set a new alarm with the same time interval.
Overdue alarms will be displayed in orange