Difference between revisions of "Translations:Sensors/10/es"

<br />
----
[[File:sensorsc.jpg|caption|right|200px]]The sensors menu from Air Navigation Pro shows the different connections of the device that can be used as sources to be shown during the navigation. 
<br />
There are four types of sources:
* '''Location Sources''': Used to display your current location and altitude (GPS-based).
* '''Attitude Sources''': Used for the synth view.
* '''Pressure Sources''': Used to show your pressure altitude.
* '''Traffic Sources''': Used to display nearby aircrafts.
<br />
Some of the external devices can be used for multiple sources. For example the Levil AHRS G provides location, attitude, pressure and traffic information to Air Navigation Pro.
<br />
__TOC__
<br />
-----
==Location Sources==
'''Flight Simulators'''
* Air Navigation Pro can be connected to flight simulators and use them as a source for the data displayed on it:
**MS Flight Simulator X / Prepar3D
** X-Plane
<br />
'''External Devices'''
* External sensors that transmit location data to Air Navigation Pro
** Flytec SensBox
** Levil AHRS G Mini and iLevil 1 & 2
** FLARM / AirAvionics Air Connect
<br />
'''iOS Location Services'''
* Useful to receive GPS signal (either internal or external). Note that other External GPS receivers like the ones from Bad-Elf, Garmin or Dual will use this sensor.
<br />
----
==Attitude Sources==
'''Flight Simulators'''
* Air Navigation Pro can connect to flight simulators and use them as source for the data displayed on it:
**MS Flight Simulator X / Prepar3D
** X-Plane
<br />
'''External Devices'''
* External sensors that transmit attitude data to Air Navigation Pro:
** Flytec SensBox
** Levil AHRS G Mini and iLevil 1 & 2
<br />
'''Internal IMU'''
* To connect with the internal gyroscopes of the iPad/iPhone.
<br />
----
==Pressure Sources==
'''Flight Simulators'''
* Air Navigation Pro can connect to flight simulators and use them as a source for the data displayed on it:
** MS Flight Simulator X / Prepar3D
** X-Plane
<br />
'''External Devices'''
* External sensors that transmit pressure data to Air Navigation Pro:
** Flytec SensBox
** Levil AHRS G Mini and iLevil 1 & 2
** ASI FlyNET2
<br />
'''Internal Barometric sensor'''
* Starting with the iPhone 6 & iPad Air 2, the devices are equipped with a barometer. Air Navigation leverage this barometer to better understand the location of the aircraft.
<br />
----
<u>'''Note:'''</u> Remember that if you are flying on a pressurized cabin, the sensor will show the cabin altitude and not the flight altitude. In order to correct this, you just have to disable the iPhone/iPad's barometric sensor and enable the GPS one.
----