Difference between revisions of "Route"

Revision as of 17:45, 18 March 2016

Other languages:

Deutsch • ‎English • ‎español

The instrument Route is one of the main features in Air Navigation for flight planning and real time navigation. It displays the most important data for the current route.

Name: By tapping on this field you will be able to change the name of the route
Routing: Departure, Destination and number of legs
Distance: Distance of the Route
Cruise speed: Information taken from the aircraft profile
ETE: ETE calculated with the information from the aircraft profile
Alternate: Select an alternate airport for the route
Dist. to altern.: Distance to alternate from last WP from route
Endurance: Calculates endurance once the Fuel on Board is entered

Fuel

Fuel on Board: Enter the fuel on board the aircraft
Fuel flow: Information gathered from the aircraft profile
Taxi time: Sets taxi time
Taxi: Calculates taxi fuel
Cruise: Calculates cruise fuel for route
Alternate: Calculates fuel needed for leg DEST - ALTN
Reserve time: Allows you to set a reserve time (By default 45 mins)
Reserve: Calculates fuel for reserve
Fuel Required: Calculates fuel for the trip taking in account, taxi, cruise, alternate and reserve time
Contingency: Endurance (Fuel on Board) minus Fuel required

Wind

You can calculate the effect of current wind to your route. For the time being the wind calculates will be only the wind at ground level.

No wind: Don't take in account wind for the route
Wind per leg: Downloads from the internet the current winds for your route legs. To push the service tap on the circled arrow at the bottom of this menu. This will take some seconds and the message "Last update: Never" will change to the current time.
Wind per route: Enter manually a direction and speed of the wind for the whole route.

caption

Remember that you must download the Free Elevation data in order to calculate the Wind per leg info.

Operational Flightplan

The route created can be converted to a flight log that can be printed out or sent by E-Mail.

To use this function just tap on the Summary of the route and select the option "Flightplan" at the top right corner.

The flight log will display route information in an easy to read table mode together with other relevant information like MSA, FREQs, TAS, GS and Fuel requirements.

To print, send or share the Operational Flightplan just tap on the icon with the arrow on the upper right corner.

Legs

Will display information about the legs of the Route. While flying it will displays the actual distance and bearing to next waypoint

Pressing the "i" at the right of every WP will show information of the WP and the option to select it or center it on the map.

Edit Mode

When in Edit Mode the information displayed will be distance, Heading, Course and ETE between the route's waypoints.

You will also be able to change the order of the waypoints by tapping the 3 lines on the right of the waypoint and dragging the waypoint up or down. By tapping on the red "-" on the left of the waypoint you'll be able to remove it from the route.

Further actions

By tapping on the yellow square with the arrow pointing up you'll be able to access further actions for the created route:

Reverse Route: Reverses the current route
Save as new Route: Will duplicate the route so that you can modify it
Send by email...: Will open iOS Mail client and attach the route as .gpx file so taht you can share it.
Request briefing: Will request the Preflight Briefing for the selected route

Back to previous page.

@@ Line 3: / Line 3: @@
 <br />
 ----
-The instrument "Route" is one of the main features present in Air Navigation for flight planning and real time navigation. It displays the most important data for the created route.
+The instrument [[Route]] is one of the main features in Air Navigation for flight planning and real time navigation. It displays the most important data for the current route.
+__TOC__
+----
 ===Summary===
-The Summary section is divide into four different sections.
+The Summary section will display at first glance the name of the route, departure and arrival airport, the number of legs, distance and ETA. When tapping on the Route a new menu will open with further options.
+==== General ====
-*General: you can set the date of the flight and select the Aircraft which will be used to. You can also create a new Aircraft profile from this tab.
+; Date of Flight
-*Route
+: Set the date and time of departure for this route
-*Fuel
+; Pilot in command
-*Wind
+: Set the pilot flying this route
+; Aircraft
+: Select the aircraft for the route. You can create a new aircarft profile by tapping on "+ New aircarft..."
+==== Route ====
+; Name
+: By tapping on this field you will be able to change the name of the route
+; Routing
+: Departure, Destination and number of legs
+; Distance
+: Distance of the Route
+; Cruise speed
+: Information taken from the aircraft profile
+; ETE
+: ETE calculated with the information from the aircraft profile
+; Alternate
+: Select an alternate airport for the route
+; Dist. to altern.
+: Distance to alternate from last WP from route
+; Endurance
+: Calculates endurance once the Fuel on Board is entered
+==== Fuel ====
+; Fuel on Board
+: Enter the fuel on board the aircraft
+; Fuel flow
+: Information gathered from the aircraft profile
+; Taxi time
+: Sets taxi time
+; Taxi
+: Calculates taxi fuel
+; Cruise
+: Calculates cruise fuel for route
+; Alternate
+: Calculates fuel needed for leg DEST - ALTN
+; Reserve time
+: Allows you to set a reserve time (By default 45 mins)
+; Reserve
+: Calculates fuel for reserve
+; Fuel Required:
+: Calculates fuel for the trip taking in account, taxi, cruise, alternate and reserve time
+; Contingency
+: Endurance (Fuel on Board) minus Fuel required
+==== Wind ====
+You can calculate the effect of current wind to your route. For the time being the wind calculates will be only the wind at ground level.
+; No wind
+: Don't take in account wind for the route
+; Wind per leg
+: Downloads from the internet the current winds for your route legs. To push the service tap on the circled arrow at the bottom of this menu. This will take some seconds and the message "Last update: Never" will change to the current time.
+; Wind per route
+: Enter manually a direction and speed of the wind for the whole route.
 [[File:danger.jpg|caption|left]]Remember that you must download the Free Elevation data in order to calculate the Wind per leg info.
 <br />
-===Legs===
+==== Operational Flightplan====  <!--T:1-->
-===Operational Flightplan===  <!--T:1-->
 The route created can be converted to a flight log that can be printed out or sent by E-Mail.
@@ Line 31: / Line 78: @@
 To print, send or share the Operational Flightplan just tap on the icon with the arrow on the upper right corner.
+===Legs===
+Will display information about the legs of the Route. While flying it will displays the actual distance and bearing to next waypoint
+Pressing the "i" at the right of every WP will show information of the WP and the option to select it or center it on the map.
+==== Edit Mode ====
+When in Edit Mode the information displayed will be distance, Heading, Course and ETE between the route's waypoints.
+You will also be able to change the order of the waypoints by tapping the 3 lines on the right of the waypoint and dragging the waypoint up or down. By tapping on the red "-" on the left of the waypoint you'll be able to remove it from the route.
+=== Further actions ===
+By tapping on the yellow square with the arrow pointing up you'll be able to access further actions for the created route:
+; Reverse Route
+: Reverses the current route
+; Save as new Route
+: Will duplicate the route so that you can modify it
+; Send by email...
+: Will open iOS Mail client and attach the route as .gpx file so taht you can share it.
+; Request briefing
+: Will request the Preflight Briefing for the selected route
+----
 <!--T:6-->
 Back to <u>[[Instruments|previous page.]]</u>
 <br />
 </translate>

Revision as of 17:45, 18 March 2016

Contents

Summary

General