Difference between revisions of "Create user waypoints"

Revision as of 19:39, 13 October 2015 (view source) Oliver (Talk | contribs) (Marked this version for translation) ← Older edit		Latest revision as of 18:19, 14 October 2015 (view source) Oliver (Talk | contribs)
Line 11:		Line 11:
	<!--T:3-->		<!--T:3-->
−	- Directly on the «moving map» by pressing and holding for 2 seconds on the desired location of the map.	+	- Directly on the «moving map» by pressing and holding the desired location of the map for 2 seconds.
	<!--T:4-->		<!--T:4-->
Line 31:		Line 31:
	<!--T:6-->		<!--T:6-->
−	Once you have created your waypoint, it should appear on the map. Example below.	+	Once you have created your waypoint, it should appear on the map. See example below.
	<br/>		<br/>

---

Latest revision as of 18:19, 14 October 2015

---

A «user waypoint» can be created as follows:

- Directly on the «moving map» by pressing and holding the desired location of the map for 2 seconds.

- From the «Custom waypoint Editor» under Tools menu.

Once you have created your waypoint, it should appear on the map. See example below.

If your waypoint does NOT appear on the map, then check that the type of waypoint you created is selected in «Map Options».

---

Back to index.