Difference between revisions of "Map TAB/es"

Revision as of 17:04, 2 November 2015

Other languages:

Deutsch • ‎English • ‎español • ‎français • ‎português

La pestaña “Map” posee 5 módulos:

Maps

You will find all the downloaded maps here. Maps can be reorganized by placing them on top or below each other, you can enable or disable them as pleased.

caption

Packages such as 3D data, Preflight briefing, Approach Charts and other subscriptions will not show in this module, but under «My products» section of the Map Store module.

Elevation

The settings for the Elevation TAB can be found here. Altitude constrains, minimum safe altitude and climb/descent gradient are the options available.

You can also show/hide airspaces in the Elevation Graph from this module.

Widgets Several features can be enabled from here, that will be displayed on the moving map:

METAR stations
NOTAM info
Runway extensions
Labels of distance/course on leg vectors
Map of Obstacles

caption

NOTAMs and Obstacles are paid subscriptions and shall be purchased from your Xample Services account.

Waypoints

In this module, you can filter, show or hide different types of waypoints to be displayed in the map, including:

Airport
Fix (Visual Reporting Point)
User Waypoint (waypoint created by the user)
Helipad
Seaplane base
ULM field
Glider field
Significant point (IFR waypoint)
DME
NDB
VOR
NDB DME
VOR DME
TACAN
VORTAC

For Airfields, it is also possible to filter by runway length and surface type.

Airspaces

A bunch of varied filters and options are available in this module:

Airspace Class filter: A, B, C, D, E, F, G, Danger (DGR), Restricted (R), Prohibited (P), Glider Prohibited (GP), Glider (WW), TSA, TRA, MATZ (MIL). Recreational (RCT), Nature Reserve (NR), FIR. Airspace Altitude filter Airspace Appearance selection.

There are also options to display the Airspaces fully-shaded and show a window label with information about them.

In order to correctly configure the Airspace altitude filters, you should take into account both the Altitude filter and the Filter mode.

The example on the left shows the altitude filter set to FL120, and the filter mode set to “At selected altitude”. This means that the map will only show Airspaces which have vertical limits within FL120.

If you change the filter mode to “Up to selected altitude” the map will show ALL the Airspaces from the surface up to FL120.

To display ALL Airspaces, you will set the altitude filter to FL200 like in the image on the right.

Back to index

@@ Line 2: / Line 2: @@
 <br />
 ----
-[[File:tabmac.jpg|caption|right]]The map TAB has 5 modules:
+[[File:tabmac.jpg|caption|right]]La pestaña “Map” posee 5 módulos: