Difference between revisions of "Traffic awareness"

Revision as of 17:19, 22 October 2015

Other languages:

When connected to an ADS-B or FLARM transmitter (See Traffic Sources), Air Navigation Pro will show traffic information on the moving Map as moving arrows. The arrow will be coloured dark if the traffic is at a similar altitude to you. Otherwise it will be coloured light grey and no tag will be displayed. Close traffics will be shown in red and you will receive an alert if a traffic is close to you around the same altitude.

The tag next to the arrow will contain the following information:

Callsign
Altitude
Speed
Vertical Speed (as an upward or downward arrow. No arrow means the aircraft is levelled).

The direction of the arrow is the heading of the aircraft. A trail of previous recorded positions of the aircraft will be displayed as a dot trace.

Bookmark traffics

You can tap on one of the arrows and set it as "favourite" to follow it. The colour of the arrow will then change to yellow. This feature can be helpful for example to highlight a colleague you are flying with or if you plan to fly in close formation. Notice, that you won't receive collision warning from aircrafts that are marked as favourites.

TCAS Mode

The Traffic awareness is set by default in the Nearby mode. You can change it to the TCAS mode by going to "Map Options - Traffic Awareness".

The TCAS mode uses the same algorithm as the TCAS present in airplanes. It will not issue though a Resolution Advisory.

Note: Air Nav Pro will warn you of a collision following the TCAS rules but no resolution will be issued.

Back to index.

@@ Line 7: / Line 7: @@
 <br />
 The tag next to the arrow will contain the following information:
-* '''Callsign'''
+*Callsign
-* '''Altitude'''
+*Altitude
-* '''Speed'''
+*Speed
-* '''Vertical Speed''' (as an upward or downward arrow. No arrow means the aircraft is levelled).
+*Vertical Speed (as an upward or downward arrow. No arrow means the aircraft is levelled).
 <br />
 The direction of the arrow is the heading of the aircraft. A trail of previous recorded positions of the aircraft will be displayed as a dot trace.
@@ Line 19: / Line 19: @@
 <!--T:6-->
-[[File:Traffic_favourite.png|left]]You can tap on one of the arrows and set it as a "favourite" to follow it. The colour of the arrow will then change to yellow. This feature can be helpful for example to highlight a colleague you are flying with or if you plan to fly in close formation. Notice, that you won't receive collision warning from Aircrafts that are marked as favourites.
+[[File:Traffic_favourite.png|left]]You can tap on one of the arrows and set it as "favourite" to follow it. The colour of the arrow will then change to yellow. This feature can be helpful for example to highlight a colleague you are flying with or if you plan to fly in close formation. Notice, that you won't receive collision warning from aircrafts that are marked as favourites.
 <br />
 ==TCAS Mode==
-[[File:TCAS.jpg|left]]The Traffic awareness is set by default in the Nearby mode. You can change it to the TCAS mode by going to Map Options - Traffic Awareness.
+[[File:TCAS.jpg|left]]The Traffic awareness is set by default in the Nearby mode. You can change it to the TCAS mode by going to "Map Options - Traffic Awareness".
 <br />
-The TCAS mode uses the same algorithm as the TCAS present in airplanes. It will not issue though a Resolution Advisory. '''Air Nav Pro will warn you of a collision following the TCAS rules but no resolution will be issued'''.
+The TCAS mode uses the same algorithm as the TCAS present in airplanes. It will not issue though a Resolution Advisory.
+----
+<u>'''Note:'''</u> Air Nav Pro will warn you of a collision following the TCAS rules but no resolution will be issued.
 ----
 <br />
-Back to <u>[[Air Navigation iOS|index]]</u>
+Back to <u>[[Air Navigation iOS|index]]</u>.
 <br />
 </translate>

Revision as of 17:19, 22 October 2015

Contents

Bookmark traffics

TCAS Mode