Page last edited 2,557 days 0 hours ago by Brainhub

Difference between revisions of "Elevation Graph/fr"

Jump to: navigation, search
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 2: Line 2:
 
<br />
 
<br />
 
----
 
----
−
[[File:freeelev.png|caption|right|250px]] Depuis le menu <u>[[Map Options menu/fr|«Map Options»]]</u>vous pouvez activer le graphique d’élevation. Si les données d’élevation sont installés pour votre région, le graphique d’élevation affichera les informations du terrain. Notez que cela ne vous montrera les données d’information '''seulement après''' le téléchargement des fichiers '''«Free Elevation data»''' depuis le Map Store.
+
From the <u>[[Map Options menu|Map Options]]</u> menu, you can turn on the Elevation Graph. If elevation data is installed for your region, the elevation graph will display terrain information. Note that data information will be shown '''ONLY''' after downloading '''Free Elevation data''' files from the Map Store.
−
<br />
+
__TOC__
−
En «mode vol», il affichera le terrain dans la direction de vol de l’avion, en mettant à jour la vue toutes les 5 secondes. '''L’altitude maximum reportée''' sera affichée sur la vue d’élévation. Il est possible effectuer un '''zoom avant ou arrière''' en utilisant deux doigts afin de voir plus ou moins de terrain. L’échelle est affiché en NM. Un symbole représentant votre avion sera affiché dans la vue avec un trait pointillé rouge, représentant votre altitude actuelle, comme indiqué par le GPS.
+
<br/>
 +
==Flight Mode==
 +
In "Flight mode", the Elevation Graph has two modes:
 +
; Planned route
 +
: Shows the terrain along the planned route.
 +
[[File:Planned_EG.PNG]]
  
−
In "Flight mode", the Elevation Graph will display the terrain in front of the aircraft, updating the view every 5 seconds. The maximum reported altitude of the total distance of terrain profile in front of us will be displayed in the graph. We can zoom in or zoom out by using two fingers to see less or more terrain. The scale is displayed in NM. A symbol representing your aircraft will be shown in the view with a red dashed line, representing your current altitude, as reported by the GPS.
+
; Ahead of you
−
 
+
: Shows the terrain in front of you
−
 
+
[[File:Ahead_EG.PNG]]
−
[[File:elevation_graph.jpg]]
+
You can toggle between modes by tapping on "Planned route" or "Ahead of you" on the elevation graph.
−
 
+
−
[[File:elevgraph.png|caption|left|250px]]En '''«mode édition»''',  il affichera le terrain '''entre 2 points''' selon la sélection du module «Route». Dans la capture d’écran à gauche, il est montré le profil du terrain pour le vecteur magenta NZKK-NZKO avec une distance totale de 13,4 MN.
+
−
Ce fonction est très utile lorsque vous planifiez votre itinéraire, et ce afin d’obtenir une estimation de l’altitude minimum de sécurité.
+
−
 
+
−
[[File:terrain_elevation_view.jpg]]
+
  
 +
*Pinch on the elevation graph to zoom in or zoom out
 +
*Swipe left or right on the top of the elevation graph to navigate on it
 +
**On "Ahead of you" Mode you will navigate and see the terrain ahead of you with your current track
 +
**On "Planned route" Mode you will navigate through the route. The darker area represents the part of the route that was already flown.
 +
*Max terrain altitude value will be shown on the top right corner of the elevation graph.
 +
*Altitude and distance units can be changed from the [[Settings]].
 +
*An icon will represent your aircraft. If when navigating through the elevation graph you leave the icon behind a new yellow icon will appear. Tapping on this yellow icon will center to your location again.
 +
* A warning will be shown when part or all of the elevation data is missing.
 +
* If a corridor width along the route has been set in the [[Route]] Instrument it will be drawn on the elevation graph as a red area.
 +
* Your current altitude is shown as a red line.
 +
<br/>
 +
----
 +
==Edit Mode==
 +
In "Edit mode", the Elevation Graph will display the terrain between the two waypoints of the selected leg. This is very useful when planning your route to get an estimate of the minimum safe altitude.
 +
[[File:Edit_Mode_EG.PNG]]
 +
<br/>
 +
===Vertical Navigation on iPad===
 +
You can plan your altitude for the route in edit mode. You can choose the altitude you plan to overly the waypoints of the route. For this there will be gray dots over the waypoints on the elevation graph that you can move upwards or downwards. After moving the dot it will change the color indicating that an altitude has been set. By default Air Navigation Pro chooses the MSA of the route as planned altitude.
 +
[[File:Planned_Atitude_EG.PNG]]
 +
By tapping on the dot a pop up will open where you can also set if you want to reach the altitude after or before the waypoint.
 +
[[File:Warning_EG.PNG]]
 +
If there is an issue with the planned altitude it will be shown as a yellow triangle on the elevation graph. You can tap on it and the error will be explained.
 
----
 
----
−
<u>'''Note:'''</u> Veuillez prendre note que même avec un bon signal GPS, l’altitude selon le GPS peut avoir une précision de +/- 200 pieds. La base de donnée d’élévation peut aussi contenir quelques imprécisions. Vous devriez toujours planifier votre vol avec une marge raisonnable pour éviter les
+
<u>'''Note:'''</u> Please note that even with a good GPS signal, the altitude as reported by the GPS may have an accuracy of +/- 200 ft. Elevation database may also contain some inaccuracies. You should always plan your flight with a reasonable margin over the
 
obstacles.
 
obstacles.
  
 
----
 
----
 
<br />
 
<br />
−
Retourner à <u>[[Air Navigation Android/fr|l'index]]</u>.
+
Back to <u>[[Air_Navigation_overview|previous page.]]</u>
 
<br />
 
<br />
 +
[[Category:Overview]]

Revision as of 15:43, 2 November 2016

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎português


From the Map Options menu, you can turn on the Elevation Graph. If elevation data is installed for your region, the elevation graph will display terrain information. Note that data information will be shown ONLY after downloading Free Elevation data files from the Map Store.


Flight Mode

In "Flight mode", the Elevation Graph has two modes:

Planned route
Shows the terrain along the planned route.

Planned EG.PNG

Ahead of you
Shows the terrain in front of you

Ahead EG.PNG You can toggle between modes by tapping on "Planned route" or "Ahead of you" on the elevation graph.

  • Pinch on the elevation graph to zoom in or zoom out
  • Swipe left or right on the top of the elevation graph to navigate on it
    • On "Ahead of you" Mode you will navigate and see the terrain ahead of you with your current track
    • On "Planned route" Mode you will navigate through the route. The darker area represents the part of the route that was already flown.
  • Max terrain altitude value will be shown on the top right corner of the elevation graph.
  • Altitude and distance units can be changed from the Settings.
  • An icon will represent your aircraft. If when navigating through the elevation graph you leave the icon behind a new yellow icon will appear. Tapping on this yellow icon will center to your location again.
  • A warning will be shown when part or all of the elevation data is missing.
  • If a corridor width along the route has been set in the Route Instrument it will be drawn on the elevation graph as a red area.
  • Your current altitude is shown as a red line.


Edit Mode

In "Edit mode", the Elevation Graph will display the terrain between the two waypoints of the selected leg. This is very useful when planning your route to get an estimate of the minimum safe altitude. Edit Mode EG.PNG

Vertical Navigation on iPad

You can plan your altitude for the route in edit mode. You can choose the altitude you plan to overly the waypoints of the route. For this there will be gray dots over the waypoints on the elevation graph that you can move upwards or downwards. After moving the dot it will change the color indicating that an altitude has been set. By default Air Navigation Pro chooses the MSA of the route as planned altitude. Planned Atitude EG.PNG By tapping on the dot a pop up will open where you can also set if you want to reach the altitude after or before the waypoint. Warning EG.PNG If there is an issue with the planned altitude it will be shown as a yellow triangle on the elevation graph. You can tap on it and the error will be explained.

Note: Please note that even with a good GPS signal, the altitude as reported by the GPS may have an accuracy of +/- 200 ft. Elevation database may also contain some inaccuracies. You should always plan your flight with a reasonable margin over the obstacles.


Back to previous page.

Retrieved from "http://manuals.thebrainhub.net/index.php?title=Elevation_Graph/fr&oldid=21095"